Видео

i unplugged them and cleaned them with no issues ? i havent changed the plugs yet though. weird

Someone explain how to fix the lock/unlock indicator on the door being stuck and how to loosen it up to go all the way left and right/lock-unlock

Thank you. My car legit just died and need this. Thank you

Thanks for the help! I did the driver side one 15+ years ago on my grandpa's 04, now my sister drives it and the passenger side went out. Easy following along with this video to make sure I didn't break anything lol.

Guys please use the correct cleaner, I remember using throttlebody on the sensors… had to order a new set.

Thanks man 👍😎

Car went into limp mode a couples nights ago when i was headed to work. No cel, codes, etc. My sunroof just started to leak a week or so ago. We had a bad storm that day and i assume it just got my bcm a little wet. Luckily the next morning when i got out of work it was fine

She sounds soo good

FYI, mine were a pain and I have a 2009 G37S with 38k miles that's never seen salt. I bought it from Vegas back in 2012.

what size are ur rims

i got the berk res test pipes with CEL fix , i ended up getting a service engine soon light , any tips?

Worked! Before watching your video, I wasn't holding it up at the end for the few extra seconds at the end.

7:00 seems like your old spark plugs are kinda wet with oil or gasoline? Is it normal they are wet on our VQ motors??

What to do if 20,000km driven spark plugs are wet with gasoline even after replacing valve cover gasket for nissan vq35hr engine?

you showed everything wondefully, though the one thing you didnt show would have been very helpful. The kick-plate removal is something I need to get off. I've gently tugged it from every angle but it doesnt want to give. Im sure I can find it on the net. Thank you for such a great and informative video, it helped me a lot!

If the bcm does get wet from this issue does it get destroyed?

Only this, is going to work. Thanks !

At 7:40 , you did the mod (removing the blocker to the hole) I was considering trying. Extremely helpful video. Both of my sunroof weeps are apparently clogged in my JX35 Infinity. Got so frustrated with the similar issue in my Volvo XC 90 that i pulled the fuse for the sunroof and totally sealed that useless thing up with a hardening sealer from a popular National windshield company. Every sunroof I had ever owned eventually leaked, every one! Thank you for this helpful video. June , 2024

Love the the video. thank you for sharing. i am about to doing the same thing on my integra. do you mind me asking you want bolts you used to connect the cat the the exhaust pipe. any insight on this would be very helpful for me. thank you.

it was hard to get the old motor off but this video helped me and my friend out so much! thanks

Hows the Z06 holding up?

How much??

Bout do this to the new G37x I got next month is On funna get it up to date

Piece of shit video fucked up my shit , skipping steps guy wtf….

Would you spray or warp the back lettering/logo on the trunk??

What's number 6 on the diagram?

Thank you a friend bought an infinity lucky me 😢 if possible the reason for looking at video no. Clear information about a m.a .p sensor or location not clear information on alldata 😢

I'm having a lot of electrical problems with my 10 g37 all wheel drive. Come to find out there's a self-diagnostic mode in the radio. I've had a lot of key fob issues and then the car started overheating the last time I was using it I don't know what the hell's going on any info would be lovely

Just bought a 2012 G37 @ 52k miles, I’ve done the oil and diff services so far, had that leak for over a week and it’s been crazy storms in Texas recently. Finally got around to using this fix today since it’s been sunny, hoping it holds 🤞 awesome video man!! Very helpful

What brand rotors or kit did u use I have the Akebono brake sim trying to find rotors and pads and lines now

Thanks!

Did you get a check engine light or nah ? maybe not because you did state that you got a tune.

I have a 2010 G37x with 171K miles, not sure if the serpentine belt changed anytime. Recently I found a squeaky noise and ordered a belt from amazon. I felt opening the filter change cover underneath ( no need to remove the entire cover) and removing the coolant reservoir is good enough to the change the belt easily. Bit tricky to push the belt inside the tensioner, once that is done from the underneath, I could work from both top and underneath to place the belt properly. Your video was helpful, especially the diagram. Thank you.

Thanks to this video I was able to change my battery. 54yr old female.😊

What was the spring order? How low did you pick i'm trying to order but was asked how low i wanted

Your amazing! First time z owner and did this without much of a hassle decides aligning the window catches!! Thank you well done video!

Thanks for this tutorial video! I just replaced my g37 start/stop button with the GTR one. It's not the easiest mod you can do but I got it done in under 30 minutes and in the end, very worth it! I just took my time. I also didn't swap the leds over as the GTR yellow on red looks pretty good to me.

For those with limited tools and/or stripped pulley bolts, u can replace it without taking anything off. (Besides coolant reservoir). The diagram he has is misleading for the sedan, look it up on Google, and put the belt on the left 2 pulleys. Put it in the general location it should go on the right, if u have the belt around the 2 pulleys on the left it should have the belt flip (direction you need) which is the correct direction for the tensioner. Grab the bottom of the belt on the right side and slip it through, pull the belt and it should be easy to slip it around the tensioner part!

I like to keep the old one in the car as an emergency spare.

Yes but what metal tube you use , size where to buy infoo

I just siliconed the sunroof told my gf not to buy a car with sunroof now she understands 😂😂

Here's a much easier way. First, locate the drain at the firewall. Snap the baffle off since it just holds debris in place and is a PART of the problem. Second, locate the drain opening in the sunroof assembly and pour a little water into the opening (unless it's already moist-this should help if there's a dried up plug in there). Third, using heavy duty (.095 thick) spiral string trimmer line, cut a piece long enough to feed from the drain opening in the sunroof, and fish it all the way until you can see it through the firewall opening. Then pull and push the line back and forth while twisting as well. This effectively "roto rooters" the drain. Lastly, test by pouring water into the drain opening and repeat as necessary. Also, when attempting to dry out the carpeting and underlayment, dont rely on just the air to dry it out. Use a product called damp rid or even uncooked rice since it's a great desiccant(although you'd have to vaccum it up).

Wrap the lower headers with heat shield too to protect the transmission and keep it cooler

question.....does converting to rear wheel drive get you better gas mileage?

I was able to push the whole pics through to the other side of the fire wall… works quite well 😂

I got 18x10.5 offset 15 for rear idk what tire to get for it

hey bro i have an ark exhaust on my q50 but its not loud my engine is stock it’s a 3.0 what can i do to make it louder? it sounds good when cold start but after its really quiet

Thank you simple and clean and straight to the point man !getting small squeaks at start

how long did it take you to complete from start to finish?

Awesome thanks for all the detail very useful!